布袋除塵系統作為一種成熟的除塵設備已廣泛應用于各行各業，我公司利用對熔煉設備專業的技術，吸收國內外先進經驗技術，針對沖天爐煙氣復雜性對該系統進行優化改進。其工作原理為：含塵氣體先進入重力沉降室，在自身重力作用下先除去較大顆粒，然后進入多管水冷除塵器，煙塵在此水冷并除去中小顆粒，煙塵冷卻到200 C以下，煙塵進入布袋除塵器進氣管內，通過初級沉降后，較粗顆粒塵及部分粉塵在初級沉降和自身重力作用下，沉落至灰斗中，并經除灰系統將粉塵從出灰口排出。另一部分較細粉塵在引風作用下，進入中箱體并吸附在濾袋外表面上，潔凈空氣穿過濾袋進入上箱體，進入上箱體，從出風管口排出。我公司制作的該除塵系統現已得到國內外幾十家大型鑄造公司的采購及使用。

優點：

1、分室側噴，循環定時吹掃。 
2、布袋使用溫度240℃，瞬間260℃。 
3、除塵效率95%以上； 
4、排放濃度≤50 mg/Nm3，煙塵林格曼黑度≤1級

DFFI-n Type Separate Chamber Blowback-Type Dust Remover is a new technical product, which is developed based on Japan Onoda technique. This product is widely used in metallurgy cement, mining company, whose effectiveness can reach the advanced international standard of Nineties. This machine adopts PLC auto-controlling system, separating chambers dedusting timingly, without pressing the air. The emission concentration is lower than state regulations 50 mg/m3 standard. This remover can change bags when the machine is running, easily operating, high safety, which is useful equipment in adverse circumstances.